Laser on Evo

Step #07 - PlanetCNC Configuration

List of Components

ItemSpecQty
-

Tools needed

USB Key
This step is only necessary if you have purchased and assembled your machine before ordering the laser. If you bought both at the same time, you can skip this step, as PlanetCNC will be already configured for the laser.

Instructions

  1. Download the 2024-01-26 version of PlanetCNC, available in the slideshow below
    1. Go to the download center and download the latest PlanetCNC profiles. Then choose the file that is compatible with your machine model, size and accessories: Evo/Pro/Fab - S/M/L - AMB/VFD - Evo High-Z.
      1. Copy both the installation and profile .zip files to a USB key.
        1. Put the USB key inside the control unit and follow the slideshow tutorial below.

          ENGLISH VERSION

          VERSION FRANCAISE