10. Expandable Touch Interface

Step #04 - Installing the Monitor Arm

List of Components

ItemSpecQty 
 DIN912 screwM6x162
 Sliding nutM62
 Arm support plateSteel 8mm1

Tools needed

Allen Key 5mm Allen Key 8mm

Instructions

  1. Insert 2 two sliding nuts as shown.
    1. Attach the arm support plate using the M6x16 screws.
      1. Connect the arm and screen assembly using the M10x30 screw.
        Depending on your preferred setup, you can also attach the arm somewhere else on your machine, this is just an example. If you own an enclosure, for instance, you might attach it to the worktable, or even somewhere else around the machine. We provided 3m long cables to give you flexibility in this installation.