Step #06 - Preparing the Return Package

Step #06 - Preparing the Return Package

List of Components to Return

ItemSpecQty 
 Control UnitEvo1
 Limit Switch Cable-4
  Steel Parts-1

Instructions

  1. If it's not already done, open the UPE - Main Box of your upgrade kit.
    1. Empty the box from all the new Pro components, keep the bubble wrap sheets and the return label pocket.
      1. Put all the steel parts inside a sheet and then place the wrapped parts at the bottom of the box.
        1. Wrap the Evo control unit, together with the limit switch cables, inside another sheet and place them on top of the steel parts.
          1. Empty the mechanical elements box and use it as a wedge to prevent the control unit from moving during transport.
            1. Close the box and tape it well.
              1. Stick the label pocket on top of the box and seal it.
                1. Find the nearest UPS drop-off location using this link to know where you can drop off the package.