Step #01 - Disconnecting the Cables

Step #01 - Disconnecting All the Cables

Tools needed

Allen Key 5/3mm Spanner 7mm

Instructions

  1. Remove the spoilerboard to facilitate the disassembly (you can leave the sliding nuts that are already in the profiles' slots).
    1. Open all the cable chain bridges.
      1. Disconnect the spindle power cable.
        1. Disconnect all the motor cables and coil them together.
          1. Disconnect all the limit switch cables and coil them together.
            1. Disconnect the emergency stop.
              1. Disconnect the touch probe.
                1. Disconnect the interface unit (HDMI and USB) and remove it from the machine frame.
                  1. Remove the control unit.
                    1. Unscrew the cable chains on the X and Y-axis.

                      Animation