6. Machine Assembly

Step #14 - Installing the Emergency Stop Button

List of Components

ItemSpecQty
 Emergency stop button/1
 ScrewM4x122
 Sliding NutM42

Tools needed

3mm Allen Key Cross head screwdriver

Instructions

  1. Slide in the two sliding nuts on the lower groove of the front profile.
    1. Unscrew the four screws of the emergency stop button to open it.
      1. Align the sliding nuts and the emergency stop button then tighten.
        1. Close the emergency stop button by re-tightening the same four screws.

          Choose the position that suits you best and is the most accessible to your configuration and space.