6. Machine Assembly

Step #13 - Plugging the Cables in the Control Unit

List of Components

ItemSpecQty
 Control Unit/1
 Z probe + cable/1
 Emergency stop + cable/1
 HDMI cable/1
 USB cable/1
 Power delivery cable/1

Instructions

  1. Start by placing the control unit under the machine.
    1. First, plug the limit switch cables. They are the ones with a dark plastic finish. They are all placed on the lower row. Match every cable with its matching coloured plug.
      1. Repeat this process for the motor cables. They are the metallic shiny ones and are placed on the top row.
        1. Then plug the z-probe on the lower connector.
          1. The emergency stop is plugged on top of the z-probe.
            1. Plug the HDMI & USB cables of the screen and keyboard.
              1. Finally plug in the power delivery cable.