6. Machine Assembly

Step #12 - Installing the AMB Spindle & Interface Unit

List of Components

ItemSpecQty
 AMB spindle+ cable1
 DIN 912 ScrewM6x126
 Sliding NutM66

Tools needed

5mm Allen Key

Instructions

  1. Slide in the six sliding nuts on the sides of the Z-axis profiles.
    1. Place the AMB support assembly on the sliding nuts and add the screws.
      1. Tighten all the screws (also the ones from the previous step).
        1. Insert the AMB spindle in the support then tighten the bolt to lock it.
          1. For the interface unit, unscrew the two top screws from the machine's feet.
            1. Slide in the interface unit and make match the notches of the interface unit with the screws.
              1. Tighten back the screws.

                Animation

                You're free to choose on which side (left or right foot) to place the interface unit.