1. Assembling the Sliding Doors

Step #11

List of Components

ItemSpecQty 
 Rectangular NutM52
 DIN912 ScrewM5x202
 DIN9021 WasherM52
 SpacerM5x122
 Angle Bracket simple20202

Tools needed

Allen Key 4mm

Instructions

  1. Slide the M5 rectangular nut on the left door (now on your right side, as shown in the animation).
    1. Position the washer, the spacer and the angle bracket as shown.
      1. Attach everything with the M5x20 screw, just above the wired sensor.
        1. Repeat those operations on the other left door.

          Double check that you are working on the correct door.