1. Assembling the Sliding Doors

Step #12

List of Components

ItemSpecQty 
 Rectangular NutM58
 DIN912 ScrewM5x308
 DIN9021 WasherM58
 SpacerM5x128
 WheelM58

Tools needed

Allen Key 4mm

Instructions

  1. Slide the M5 nut in the profile as shown.
    1. Position the washer, the spacer and the wheel.
      1. Fix them with the M5x30 screw.
        1. Repeat this to install the other wheels as shown.
          1. Repeat those operations on the two other doors.

            Make sure you placed the wheels on the correct side of the doors. Leave 10cm between them.