8. Limit Sensors & Emergency Stop

Step #05 - Placing the Emergency Stop

List of Components

Item		Spec	Qty (S/M/L)
	Emergency stop button	-	1
	DIN912 screw	M4x12	2

Tools needed

Allen Key 3mm

Screwdriver

Instructions

Open the emergency stop button by unscrewing the 4 top screws.
Position the bottom part of the casing (the black part) in front of the 2 sliding nuts, located at the front aluminium profile of the machine.
Use the M4x12 screws to tighten the casing to the profile.
Put back the top part of the casing and close it using the 4 screws.

Animation

When attaching the bottom part of the casing, make sure that the cable is orientated down.