8. Limit Sensors & Emergency Stop

Step #04 - Adding the Y-axis Sensor Targets

List of Components

ItemSpecQty (S/M/L)
 SpacerM6x903
 DIN912 screwM6x103
 DIN912 screwM6x163

Tools needed

Allen Key 5mm

Instructions

  1. Using 2 M6x16 screws, attach 2 spacers on the left side of the gantry, as shown in the animation. Add one M6x10 screw at the end of each spacer.
    1. Attach 1 spacer on the right side of the gantry, as shown in the animation. Add another M6x10 screw at the end of it.

      Animation