1. Table Frame

Step #24 - Fixing the Lateral Gussets

List of Components

Item		Spec	Qty
	Gusset	Steel 8mm	8
	DIN912 screw	M6x16	16
	Sliding nut	M6	8

Tools needed

Allen Key 5mm

Instructions

Insert the 1 sliding nut in the lateral profile, as shown in the animation.
Tighten 1 gusset using 2 screws each time.
Replicate the same assembly with the 7 remaining gussets.

Animation

Make sure to fix the gussets on the lower slots of the aluminium profiles.

Note that the frame has now a front and a back side. Identify it thanks to the double low crosswise profiles at the front.