1. Table Frame

Step #23 - Fixing the Crosswise Gussets

List of Components

ItemSpecQty
 GussetSteel 8mm6
 DIN912 screwM6x1612
 Sliding nut M612

Tools needed

Allen Key 5mm

Instructions

  1. Insert 1 sliding nut in the vertical and crosswise profiles at the back, as shown in the animation.
    1. Tighten the 1 gusset using 2 screws each time.
      1. Replicate the assembly with the 5 remaining gussets.

        Animation

        Make sure to fix the gussets on the lower slots of the aluminium profiles.