1. Table Frame

Step #22 - Attaching the Remaining Crosswise Profiles to the Frame

List of Components

ItemSpecQty
 DIN912 screwM6x1664
 Sliding nut M664
 DIN9021 washerM664

Tools needed

Allen Key 5mm Frame assembly gauge

Instructions

  1. Insert 4 sliding nuts on each side of the lateral profiles, in the top slots.
    1. Take a 6030 crosswise profile (1410mm) and slide it next to the central profile.
      1. Using the assembly gauge, firmly press it against the central profile and fully tighten it using 4 screws and 4 washers on each side.
        1. Repeat from step #1 with a 6060 crosswise profile (1410mm).
          1. Alternate with 6030 and 6060 profiles all along the frame until you reach both ends.

            Animation