1. Table Frame

Step #01 - Preparing the Crosswise Profiles (1/2)

List of Components

Item		Spec	Qty
	Alu profile 6030	1410mm	6
	Angle bracket 6060	-	24
	DIN912 screw	M6x16	48
	Sliding nut	M6	48
	DIN9021 washer	M6	48

Tools needed

Allen Key 5mm

Instructions

Place 2 sliding nuts on each side of the aluminium profile.
Attach an angle bracket at each end, using 2 screws and 2 washers each time. Do not fully tighten the screws.
Turn it over and repeat these operations on the other face.
Replicate the same assembly 5 times.

Animation