1. Table Frame

Step #07 - Assembling the Lateral Sides of the Frame (1/2)

List of Components

ItemSpecQty
 DIN912 screwM6x164
 Sliding nut M64
 DIN9021 washerM64

Tools needed

Allen Key 5mm

Instructions

  1. Take 1 vertical profile (600mm) and 2 lateral profiles (1410mm) from the previous steps.
    1. Attach them together as shown in the animation, using 2 screws, 2 sliding nuts and 2 washers on each side.
      1. Fully tighten all the screws.
        1. Replicate the same assembly a second time.

          Animation

          The lateral profile should be attached 150mm above the bottom side of the vertical one.