1. Table Frame

Step #06 - Preparing the Vertical Profiles

List of Components

ItemSpecQty
 Alu profile 6030600mm6
 Angle bracket 3030-12
 DIN912 screwM6x1612
 Sliding nut M612
 DIN9021 washerM612

Tools needed

Allen Key 5mm

Instructions

  1. Place 1 sliding nut at one side of the aluminium profile (the one without threaded holes)
    1. Attach an angle bracket, using 1 screw and 1 washer. Do not fully tighten the screw.
      1. Turn over the profile and repeat these operations on the other face.
        1. Replicate the same assembly 5 times.

          Animation