1. Table Frame

Step #08 - Assembling the Lateral Sides of the Frame (2/2)

List of Components

ItemSpecQty
 DIN912 screwM6x164
 Sliding nut M632
 DIN9021 washerM64

Tools needed

Allen Key 5mm

Instructions

  1. Place the 2 previous assemblies on the floor in a mirror image of each other (see picture below)
    1. First, pre-place 8 sliding nuts on one lateral profile and then 6 sliding nuts on the other one.
      1. Repeat the operation on the mirror assembly.
        1. Take 4 vertical profiles (600mm) and attach them at each end, also with a 150mm distance, using 2 sliding nuts, 2 screws and 2 washers each time.
          1. Fully tighten all the screws.

            Animation

            Pay attention to the orientation of the profiles and to the number of sliding nuts on each side, they will be useful in the coming steps.