1. Table Frame

Step #04 - Preparing the Large Crosswise Profiles (1/2)

List of Components

Item		Spec	Qty
	Alu profile 6060	1410mm	4
	Angle bracket 6060	-	16
	DIN912 screw	M6x16	32
	Sliding nut	M6	32
	DIN9021 washer	M6	32

Tools needed

Allen Key 5mm

Instructions

Place 2 sliding nuts on each side of the aluminium profile.
Attach an angle bracket at each end, using 2 screws and 2 washers each time. Do not fully tighten the screws.
Turn it over and repeat these operations on the other face.
Replicate the same assembly 3 times.

Animation