1. Table Frame
Step #03 - Preparing the Lateral Profiles
List of Components
| Item | | Spec | Qty |
|---|
| | Alu profile 6030 | 1410mm | 4 |
| | Angle bracket 3030 | - | 16 |
| | DIN912 screw | M6x16 | 16 |
| | Sliding nut | M6 | 16 |
| | DIN9021 washer | M6 | 16 |
Instructions
- Place 1 sliding nut on each side of the aluminium profile.
- Attach an angle bracket at each end, using 1 screw and 1 washer each time. Do not fully tighten the screws.
- Turn it over and repeat these operations on the other face.
- Replicate the same assembly 3 times.
Animation
