6. Machine assembly

Step #19 - Cable management

List of Components

ItemSpecQty
 Hole coverNylon2
 Cable sleeve/2
 Zip-tie/4

Tools needed

Cutting pliers
Make sure to fix the cables when the machine is fully extended on the Z, X & Y-axis. If not, you risk damaging the machine.

Instructions

  1. Join the X & Z cables with the cable sleeve. Make sure the Z is at its maximum height.
    1. Join all cables coming out of the gantry side with the cable sleeve.
      1. Use 2 cable-ties to attach them on the gantry plates.
        1. Place the nylon hole covers on both gantry plates.
          1. Use two cable-ties to attach the remaining cable.