4. Z-axis assembly

Step #04 - Assembling the Back Plate

List of Components

ItemSpecQty
 Z-axis bearing support/1
  Bearing support - openAcrylic 3mm1
 Bearing support - closed Acrylic 3mm1
  DIN 912 Screw M5x162
 Lock NutM52

Tools needed

Allen Key 4mm Spanner 8mm

Instructions

  1. Align the bearing support pieces with the holes on the metal plate - first the closed one, then the open one.
    1. Insert the two M5 screws.
      1. Add two nuts but do not tighten yet .

        Animation

        Make sure to respect the order while assembling the bearing supports.