4. Z-axis assembly

Step #03 - Mounting the Z-Motor

List of Components

ItemSpecQty
  SpacerM5x304
  DIN 912 screw M5x454
 LocknutM54

Tools needed

Allen Key 4mm Spanner 8mm

Instructions

  1. Align the motor holes with the ones on the metal plate, connector facing up as shown in the animation.
    1. Insert the spacer between the motor and the plate.
      1. Insert the screw and the nut then tighten down.
        1. Repeat these steps for the 3 other spacers.

          Animation
          Respect the screws & bolts orientation for easier servicing.