1. Table structure

Step #05 Table Assembly

List of Components

ItemSpecQty
 DIN9021 washerM6x1816
 DIN912 screwM6x1616
 Sliding NutM616

Tools needed

Allen Key 5mm

Instructions

  1. Slide in 4 sliding nuts on the frame (built on step#03).
    1. Slide the middle profile (built during step#04) in and center it roughly.
      1. Align each angle bracket with the sliding nuts.
        1. Attach the screw, washer & nut but don't tighten it yet.
          1. Position the middle profile at 310 mm(for S/M version) or 510 mm (for L version) from the side. (see picture)
            1. Tighten down all screws.

              Animation