1. Table structure
Step #01 - Preparing the Frame Corners (1/2)
List of Components
| Item | | Spec | Qty | | |
|---|
| | | S | M | L |
| | Angle bracket B-type | 60x60 mm | 4 | 4 | 4 |
| | Aluminium Profile 6030 | 1170 mm | - | 2 | 2 |
| | Aluminium Profile 6030 | 770 mm | 2 | - | - |
| | DIN912 screw | M6x16 | 8 | 8 | 8 |
| | DIN9021 washer | M6x18 | 8 | 8 | 8 |
| | Sliding nut | M6 | 8 | 8 | 8 |
Instructions
- Insert 4 sliding nuts in the aluminium profile as shown
- Attach the angle bracket with the screws & washers. Do not tighten yet.
- Repeat the operation for the other side.
- Repeat all these steps to obtain 2 assembled profiles.
Animation
