1. Table structure
Step #02 - Preparing the Frame Corners (2/2)
List of Components
| Item | | Spec | Qty | | |
|---|
| | | S | M | L |
| | Aluminium profile | 1020 mm | - | - | 2 |
| | Aluminium profile | 620 mm | 2 | 2 | - |
| | DIN912 screw | M6x16 | 8 | 8 | 8 |
| | DIN9021 washer | M6x18 | 8 | 8 | 8 |
| | Sliding nut | M6 | 8 | 8 | 8 |
Instructions
- Place 2 sliding nuts in each side of the aluminium profiles as shown
- Pre place 2 sliding nuts in the left side aluminium profile
- Attach the aluminium profile with the screws and washers
- Repeat these operations on the other side (no need to slide the two extra sliding nuts)
Animation
