1. Table structure

 Step #03 - Assembling the Corners

List of Components

ItemSpecQty
 DIN9021 washerM6x188
 DIN912 screwM6x168

Tools needed

Allen Key 5mm EVO PMMA Gauge

Instructions

  1. Align the sliding nut with the angle bracket
    1. Attach the screw, washer & nut but don't tighten yet.
      1. Repeat the operation until you completed the 4 corners.
        1. Use the gauge to square the angles before tightening them.

          Animation

          Use the custom gauge to properly square and level the frame.
          Double-check that the corners are squared and the screws tightened. This will impact the machine's accuracy.