1. Table structure
Step #04 Preparing the Middle profile
List of Components
| Item | | Spec | Qty | | |
|---|
| | | S | M | L |
| | Aluminium profile 6030 | 770mm | 1 | - | - |
| | Aluminium profile 6030 | 1170mm | - | 1 | 1 |
| | Angle Bracket B Type | 6060 | 4 | 4 | 4 |
| | DIN9021 washer | M6x18 | 16 | 16 | 16 |
| | DIN912 screw | M6x16 | 16 | 16 | 16 |
| | Sliding Nut | M6 | 16 | 16 | 16 |
Instructions
- Slide in 4 sliding nuts into the aluminium profile as shown.
- Align the angle bracket and attach the screws, washers & nuts but don't tighten them yet.
- Repeat those steps on the other side of the profile.
Animation
