The arm doesn't stay in up
1. Description of the problem
Your screen goes down by itself avoid you to place it in the "up" position.
2. Possible origins
There are several possible origins here :
- Your springs are not tightened enough.
- You are leaving your squeegee on the screen without putting it against the head of the press.
3. Solution
- Fasten the screws of your springs to make sure they are at maximum tension.
- You can also rotate the springs to add or remove tension.
- Check if the screen can stay up by modifying your squeegee position on it.
- Try to only hold your screen on the press. If it doesn't work, it probably means it is too heavy for this press.