1. Preparing The Crosswise Profiles

Step #05

This step is only necessary if you have a worktable SIZE L.

List of Components

ItemSpecQty 
L
 Alu Profile 606013801
 Sliding NutM616
 DIN912 ScrewM6x1616
  DIN9021 WasherM616
 Angle Bracket60604

Tools needed

Allen Key 5mm

Instructions

  1. Attach the angle brackets 6060 as shown.
    1. Pre assemble the screw, the washer and the sliding nut on the other side of the brackets.
      1. Repeat those operations on the other side of the profile.

        Animation

        Before tightening the brackets, make sure they are aligned with the profile's edge.