1. Preparing the crosswise profiles

Step #01

List of Components

ItemSpecQty 
SML
 Alu Profile 6030980 mm42-
 Alu Profile 60301380 mm-24
 Sliding NutM6323232
 DIN912 ScrewM6x10161616
 DIN912 ScrewM6x16161616
 DIN9021 WasherM6161616
 Angle bracket simple30888
 Angle bracket B-type 30888

Tools needed

Allen Key 5mm

Instructions

  1. Attach the angle bracket B-type as shown
    1. Pre-assemble the screw, the washer and the sliding nut on the other side of the bracket
      1. Attach the simple bracket as shown and pre-assemble the screw, the washer and the sliding nut on the other side of the bracket
        1. Repeat those operations on the other side of the profile as shown
          1. Install those brackets on the four profiles

            Animation

            Before tightening the brackets, make sure they are aligned with the profile's edge.