1. Table structure

 Step #03 - Installing the Collecting Pipe

List of Components

ItemSpecQty
 Clamping CollarØ902
 DIN912 screwM5x124
 Philips Screw-4
 Sliding nutM54

Tools needed

Allen Key 4mm Screwdriver

Instructions

  1. Insert 4 sliding nuts in the aluminium profile as shown
    1. Attach the first support with the screws.
      1. Place it 460mm away from the table legs.
        1. Preplace the second support.
          1. Place the collecting pipe assembly in the brackets.
            1. Adapt the support placement to match the collector (see animation).
              1. Place the top brackets and fix them with the Philips screws.

                Animation
                Don't forget to place the rubber protection on the clamping collar.