Laser on Evo

Step #08 - Fixing and Connecting the Laser Adapter

ItemSpecQty
 Laser CNC Adapter Unit-1
 DIN912 ScrewM4x122
 Sliding NutM42

List of Components

Tools needed

Allen Key 3mm
The adapter is an electronic box that translates signals from the control unit to the laser. It also serves as the main switch for the laser, and must therefore be easily accessible. You can use the aluminum profiles and sliding nuts or the worktable to fix the adapter on it.
From July 2024, we deliver the new version of the PLH3D-CNC Adapter. It has the same functionality but offers a better user interface, and has a slight change in the cabling. The laser signal cable has to be plugged as closer possible to the power supply side.

Instructions

  1. If you have a worktable with aluminium profiles, you can use the M4 screws and sliding nuts to attach it at the front.
    1. If your worktable has a top wooden surface, you can also attach the adapter using small wood screws.
      1. Once the adapter is fixed, connect all the cables to it: the power supply, laser signal cable and control unit cable.

        Connection Diagram