Step #02 - Dismantling the X-axis Carriage (2/2)

Step #02 - Dismantling the X-axis Carriage (2/2)

Tools needed

Allen Key 3/4/5mm Allen Key 7mm

Instructions

  1. Remove the bottom steel plate with its bearing.
    1. Slide down the linear blocks before removing the linear rails.
      1. Remove the M6 sliding nuts (keep them aside).
        1. Remove the back plate and its sliding nuts (keep them aside).
          1. Detach the two aluminium profiles.
            1. Remove the motor and its spacers.
              1. Loosen the FK12 bearing block nut and remove the ballscrew.

                Animation (Pro & Fab models)