Step #01 - Dismantling the X-axis Carriage (1/2)

Step #01 - Dismantling the X-axis Carriage (1/2)

Tools needed

Allen Key 4/5mm

Instructions

  1. Remove the spindle and its mounting bracket.
    1. Unscrew the linear bearings, the ballscrew nut, and the Z-axis nut offset plate.
      1. Disconnect the cable chain holding system.
        1. Move down the ballscrew nut to access the 4 screws behind it and remove them.
          1. Remove 16 screws that link the whole X-carriage to the linear bearings, make sure to firmly hold it once you've removed the last screw!
            1. Do not forget to take apart the X-axis nut offset plate.

              Animation (Pro model)

              Animation (Fab model)