3. Installing the Doors

Step #08

List of Components

ItemSpecQty (S/M/L)
 Rubber Joint280cm1

Tools needed

Box cutter or Scissors

Instructions

  1. Take a box cutter or a pair of scissors and cut the whole stripe of the rubber joint into 56 pieces of 5cm.
    1. Open the doors at the front and at the back.
      1. Insert all the rubber joints from the inside face of the structure and the doors.
        1. On the structure, there should be 5 joints on the top and bottom profiles, and 1 joint in the middle of the side profiles.

          You can use a hex key or a similar tool to help you firmly insert the joints.