3. Installing the Doors

Step #02

List of Components

ItemSpecQty (S/M/L)
 Interface Unit-1
 WasherM54
 SpacerM5x402
 DIN912 ScrewM5x502

Tools needed

Allen Key 4mm

Instructions

  1. Take the interface unit that you removed earlier from your machine.
    1. Pre-assemble the screw, spacer, and washers on the interface unit outer fixing holes and bring the assembly to the front of the structure.
      1. Attach it using the two screws and the square nuts that you inserted in the profile earlier.

        Hold the Interface Unit with one hand and tighten one screw after the other with your second hand.