1. Assembling the Sliding Doors

Step #09

List of Components

ItemSpecQty 
 Rectangular NutM44
 DIN7991 ScrewM4x64
 Magnet Square20x20mm2
 Counter Plate20x20mm2

Tools needed

Allen Key 2.5mm

Instructions

  1. Pre-assemble the rectangular nut, the magnet and the screw.
    1. Slide the pre-assembled magnet in the profile slot as shown.
      1. Tighten it at the centre of the profile.
        1. Pre-assemble the rectangular nut, the counter plate and the screw.
          1. Slide the pre-assembled magnet in the profile slot as shown.
            1. Tighten it at the centre of the profile (in front of the magnet)
              1. Repeat those operations on the two other doors.

                Be careful to attach the magnets and the counter plates on different door types (right and left, respectively).