1. Assembling the Sliding Doors

Step #05

List of Components

ItemSpecQty 
 Alu Profile 2020880mm2
 Rectangular NutM54
 DIN912 ScrewM5x104
 Handle118mm2

Tools needed

Allen Key 4mm

Instructions

  1. Slide the alu profile as shown.
    1. Pre-assemble the handle with the M5 screws and rectangular nuts
      1. Slide the pre-assembled handle in the profile slot as shown, you can fix it in the middle of the profile.
        1. Once the profile is correctly positioned, tighten all the screws of the connection plates.
          1. Repeat those operations to obtain twice the same assembly.

            Make sure you slided the handle in the correct slot.