1. Assembling the Sliding Doors

Step #03

List of Components

ItemSpecQty 
 Rectangular NutM42
 ISO7380 ScrewM4x82
 Rubber Bump/2

Tools needed

Allen Key 2.5mm

Instructions

  1. Pre-assemble the rectangular nut, the rubber bump and the screw.
    1. Slide the pre-assembled rubber bump in the profile slot as shown.
      1. Tighten it 10cm away from the profile's edge.
        1. Repeat those operations to obtain twice the same assembly

          Make sure that you installed the rubber bumps on the back side.