2. EVO/PRO - Table Mount + ENC

Step #02 - Lower Tube

List of Components

Item		Spec	Qty
	Galva Tube	1200mm	1
	Hook	Ø27mm	1
	Pivot (male)	Ø27mm	2

Tools needed

Allen Key 6mm

Instructions

Slide the hook to the middle of the tube and screw it down.
Slide the 2 female pivots on the tube. One is flush with the top of the tube and the other is 310mm below.
Check for good alignment and tighten down.

Animation

Make sure both pivots are aligned before tightening down.