2. EVO/PRO - Table Mount + ENC

Step #01 - Upper Tube

List of Components

ItemSpecQty 
 Galva tube5002
 L 90°/1
 Hook/1
 Pivot female/2

Tools needed

Allen Key 6mm

Instructions

  1. Slide the 2 tubes into the L 90° and tighten down.
    1. Slide the hook at the end of the tube and tighten down.
      1. Slide the 2 female pivots on the other tube. One is at the end of the tube and the other is 300mm apart. Then tighten down.

        Animation

        Make sure the 2 pivots are aligned.