1. Fab

Step #13 - Setting up the Cordless Control Device (METABO only)

ItemSpecQty
 Cordless Control wall plug/1
 Cordless Control switch/1

Instructions

  1. Plug the wall plug into an electrical outlet and connect the vacuum to it.
    1. Place the cordless control switch on the PVC sleeve of the Dust Shoe.
      1. Long press the switch until blinking blue (pairing).
        1. Check by pressing the cordless switch, the vacuum should turn on.
          This automatic switch functions by detecting vibration. If you encounter trouble, make sure the strap and both clamping rings of the dust shoe (Spindle & PVC sleeve) are tight.
          If you encounter trouble while setting the cordless control, you can refer to this video :
          Metabo Start/Stop Cordless Control