1. FAB

Step #09 - Dust Shoe Connection

List of Components

ItemSpecQty 
 Flexible Hose/1
  Hose reductorPVC1
 Aluminium pipe fittingPVC1
 Aluminium PipeØ501
 Clamping Ring/1

Tools needed

Flat head screwdriver

Instructions

  1. Insert the pipe reductor into the flexible hose end.
    1. Secure it by tightening the clamping ring onto the hose end.
      1. Slide the aluminium pipe into the reductor.
        1. On the dust shoe (not included), unscrew the M6 bolt and insert the PVC fitting for the aluminium pipe.
          1. Insert the dust shoe on the spindle by unscrewing the other screw. Then tighten both screws.
            1. Slide the aluminium pipe in the dust shoe assembly.