1. Mounting The Spoilerboard

Step #01

List of Components

ItemSpecQty (S/M/L)
 Sliding NutM66
 DIN912 ScrewM6x166
 MDF board200x8001

Tools needed

Allen Key 5mm

Animation

Instructions

  1. Insert the sliding nuts into the profile slot. Leave 140mm between each nut.
    1. Place the MDF board over the table frame and make sure that the holes and the sliding nuts are aligned
      1. Keep 15mm between the MDF board and the aluminium profile
        1. Tighten it with the screws
          Make sure that the spoilerboard is 15mm away from the back of the aluminium frame