9. Cable Management

Step #09 - Closing the X-axis Cable Chain

List of Components

ItemSpecQty (S/M/L)
---

Tools needed

-

Instructions

  1. Bring the X-axis carriage to the right side of the machine.
    1. Gather the motor, sensor, and spindle cables of the Z-axis and position them with the same orientation as the cable chain.
      1. Close the first bridges to secure the position of the cables.
        1. Attach the cable chain to the female connector.
          1. Slightly pull the cables to make them enter the cable chain nicely and without being too loose.

            Animation

            To make operation 4 easier, you can use a screwdriver to open the sides of the connector while attaching the cable chain.