6. Y-axis Frame Assembly

Step #06 - Frame & Y1-axis Ballscrew Assembly

List of Components

ItemSpecQty (S/M/L)
 DIN912 screwM6x1612

Tools needed

Allen Key 5mm

Instructions

  1. Bring the Y1- axis ballscrew assembly, orientated with the motor at the back.
    1. Use the assembly gauge to make sure that it is placed in the right position, as shown in the pictures below.
      1. Use 12 screws to tighten the front and the back to the frame.

        Animation

        Take time to make sure that the ballscrew assembly is correctly aligned, since this will improve the overall performance of your machine.