5. Y-axis Ballscrews Assembly

Step #03 - Installing the Y-axis Feet

List of Components

ItemSpecQty (S/M/L)
 DIN912 screwM6x2016
 Y-axis foot-4

Tools needed

Allen key 5mm

Instructions

  1. Install the Y-axis foot and tighten it with the screws.
    1. Repeat this operation on the other side of the profile.
      1. Repeat these steps to mount the second profile as a MIRROR assembly
        Be sure that the anti-slip rubber strips are correctly located on the bottom of the profiles.
        Use the custom gauge to slightly elevate the profile and align it with the holes of the Y-axis foot.

        Animation