4. Z-axis & Spindle
Step #02 - Attaching the Ballscrew
List of Components
| Item | | Spec | Qty (S/M/L) |
|---|
| | Nut offset plate | - | 1 |
| | DIN912 screw | M5x25 | 4 |
Instructions
- Move the steel plate down to allow access to the nut housing of the ballscrew.
- Turn the ballscrew nut, so that the flat side of the housing is facing up. Then, place the offset plate above the nut housing.
- Move the plate back up, align it with the holes of the offset plate and tighten it using 4 screws.
Animation
