4. Z-axis & Spindle

Step #01 - Attaching the Z-axis Plate

List of Components

ItemSpecQty (S/M/L)
 Z-axis spindle plate-1
 DIN912 screwM5x128

Tools needed

Allen Key 4mm

Instructions

  1. Position the steel plate above the slide blocks and use 8 screws to tighten it.

    Animation

    Before placing the steel plate, check the orientation of the ballscrew nut housing, it has to be facing up in order to be attached in the next steps.
    You can move the plate up to very if it is correctly aligned with the top of the Z-axis.